Hodges Marine Electronics

Home > Trim Tabs >   Boat Leveler 18" x 9" Trim Tab Set
	Condition? New Retail Box Notify Me When In-Stock List Price: $600.00 Our Price: $332.58 You Save $267.42! Stock Status: (Out of Stock) Availability: PENDING Product Code: BOAN189000 Qty:

Description   Boat Leveler 18" x 9" Trim Tab Set Features: Wiring Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy. Solenoids They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections. Motor A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled. Brackets Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object. Pump Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure. Motor Cover 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down. Cylinders Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion. Trim Tabs 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting. Hose Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid. Rocker Type Controls Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance. One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied. Manufacturer Part Number: N189000

Related Products... LENCO 12" X 30" SUPER STRONG TRIM TAB KIT WITH TAC Our Price: $913.53 Add LENCO 9" X 9" RACING TAB KIT WITH TACTILE SWITCH Our Price: $500.12 Add LENCO 19" X 14" EXTREME DUTY RACING TAB KIT WITHOU Our Price: $1,328.47 Add LENCO 12" X 9" RACING TAB KIT WITHOUT SWITCH Our Price: $419.00 Add LENCO 12" X 12" EDGEMOUNT TRIM TAB KIT WITHOUT SWI Our Price: $374.21 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Trim Tabs

	ACR 2ND STATION POINT PAD CONTROL FOR RCL-75 $59.10
	Adventure Medical Paddler $46.99
	Raymarine ST40 Depth with Thru-hull Transducer $201.38
	Scotty Anchor Kit - 1.5lb. Anchor And 50' Nylon Line $25.43
	SI-TEX SP-80L Autopilot Designed for Outboards. Includes Pump and Linear Feedback $1,488.01
	Plastimo Ne Premium Rope Chain 15' 1/4" Ht To 200' 1/2"Rope $220.28
	Raymarine SR100 Sirius Satellite Weather Service Receiver $899.99
	Poly-Planar MA9020 Gunwale Mount Speakers (pair) - Pair $69.29
	Lewmar 185tt6.0kw 8hp 24v Bow Thruster $3,392.00