Home > Gauges/Navigation Fuel Flow/Weather > Accessories >

Clipper Ex-1 Exhaust Temp Monitor & Alarm
Clipper EX-1 Exhaust Temp Monitor & Alarm

Product Condition? Brand-New
Manufacturer's Warranty? Yes, Valid
Authorized Reseller? Yes

Notify Me When In-Stock
List Price: $199.00
Our Price: $167.97
You save $31.03!
Loc Bin: UNK

Quantity in Stock
: Out of Stock
Product Code: CLIEX-1

Description Extended Info
Clipper Ex-1 Exhaust Temp Monitor & Alarm

EX-1 Exhaust Temperature Monitor/Alarm

The EX-1 continually displays the exhaust gas temperature in wet exhaust systems giving advanced warning of potential problems.

The EX-1 measures the exhaust gas temperature directly and displays it in degrees centigrade or Fahrenheit. Once the normal working temperature has been established a maximum temperature, a few degrees higher, can be programmed into the EX-1 which will then sound an alarm if that temperature is exceeded.Even a small rise in temperature can indicate a potential problem such as a minor blockage, leak or failing pump which can be corrected before a complete failure occurs.

Technical Specifications
  • Compact size 125 x 62 x 23mm with high contrast LCD
  • Supply current less than 1.5mA
  • Supply Voltage 8 to 15 volts DC.
  • Supplied with sensor and 5M cable
  • Temperature range -35 to +170° Centigrade
  • Threshold range -35 to +170° Centigrade.( -31 to +338° Fahrenheit.)

Manufacturer Part Number: EX-1

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
A great addition to the dash June 30, 2015
Reviewer: Lance from San Diego, CA  
I've a pair of Cummins 370 hp motors in my 38' express cruiser.  From what I understand, if you have a cooling problem with the raw water side, you'll likely burn up the rubber exhaust before you see the overheat on the engine.

These temperature gauges are extremely easy to install, a small hole in the rubber hose - strap in the sensor.  A pair of wires to the dash and power off another gauge or circuit - and you're done.

They are very precise and show the temperature of the exhaust flow just after the water mixes.  

Basically, I'm looking at a mechanically injected engine that will destroy itself if something goes wrong - this is great info at a cheap price.  I looked at the simpler external temperature limit switches that people typically strap on the outside of the rubber exhaust hose - too slow to react and no data other than the alarm state.

My ONLY criticism is that they are rather large displays and don't combine into a single gauge for dual installations.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Clipper EX-1 May 4, 2015
Reviewer: Anonymous Person  
Product was easy to install and setup.  I installed the unit on my Volvo 7.4GI and it shows temperature of 125 degrees when running at 3300 rpm.

Was this review helpful to you?

Browse for more products in the same category as this item:

Gauges/Navigation Fuel Flow/Weather > Accessories
Gauges/Navigation Fuel Flow/Weather