 |
 |
 |
|
Engineered for 30'- 65' boats, the Furuno 1932MK2 radar offers exceptional power, target detection and reliability. Featuring Furuno's custom microwave IC receiver design, this radar has a 10" diagonal CRT daylight-bright display with eight-level quantization. Plus, it's packed with high-speed micro-processor technology and features that help you identify what's out there. And like other Furuno radars, it can be inter-connected with other nav equipment, chart plotters and even sounders, through Furuno's programmable NMEA 0183 interface system. The 1942MK2 comes with a 4' open array antenna.
Standard Features
- High Resolution, Non-Glare 10 Inch CRT Display
- 6.0 Kilowatt Transmitter Unit
- Up to 17 User Selected Range Scales from 1/8th to 64 NM
- User Adjustable Duplex (In or Out) Radar (Guard Zone) Alarm
- User Selected Time Echo Trails for Target Threat Assessment
- Automatic or Manual Tuning Receiver
- 6db Noise Factor Logarithmic Receiver
- Three Modulator Pulse lengths and Repetition Rates
- Programmable F1 and F2 Keys for Optimized Radar Picture
- Automatic or Manual Control of Rain Clutter (FTC)
- Automatic or Manual Control of Sea Clutter (STC)
- Waypoint Lollipop Navigation Aid Overlaid on Radar Picture **
- Power Saving Watchman, or Sleep Mode for Safety at Anchor
- Multi-step Interference Rejecter and Echo Stretch to Enhance Picture
- 100% Picture Off-Centering or 2 x Target Area Zoom
- Two VRM's and EBL's for Rapid Target Data, one may be Offset
- Course-up, Head-up, North-up or True Motion Display Modes **
- Navigation Data Display in Standby *
- Automatic Video Level Adjustment (up to 8 Levels) for Picture Enhancement
- Target/Cursor Position and Output to Plotter, using TLL Key **
- Optional ARP10, 10 Target ARPA **
Shipping Information
Power Requirements
- 12 or 24/32 VDC, 52 Watts, Fuse Change Required
- 28 Watts in Power Economy, Standby or Watchman Mode
Notes
- *Appropriate Nav Data Input Required.
- **Appropriate Compass and Nav Data Input, Required
Included Accessories/Parts:- Manual
- Mounting Bracket
- Power Cable
Manufacturer Part Number: 1942MK2
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
