Home > Pumps/Plumbing - Pumps/Blowers/Toilets > Plumbing - Pumps, Toilets >

Jabsco Filterless Bilger - Sink - Shower Drain Pump
Jabsco Filterless Bilger - Sink - Shower Drain Pump


 
Product Condition? Brand-New
Manufacturer's Warranty? Yes, Valid
Authorized Reseller? Yes
List Price: $252.18
Our Price: $144.25
You save $107.93!

Stock Status: In Stock
Availability: Usually Ships Same Day
Product Code: JAB50880-1000
Qty:

Description Quick Specs Extended Info
 
Jabsco Filterless Bilger - Sink - Shower Drain Pump
Jabsco Filterless Bilge / Sink / Shower Drain Pump 4.2 Gpm


Shower Drain and Bilge Pump
Robust Single Diaphragm Design Sink & Shower Drain Pump

Flow rate: Nominal 16 Litres/min (4.2 US gallons/min)
Self-priming from dry up to 3m (10ft)

Features:
  • Flexible installation
  • No filter required
  • Compact and simple design
  • Dry running capability
  • Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard
  • Built to ISO 15083 Specification
  • Meets BSEN 50081 (Electro Magnetic Compatibility)




Manufacturer Part Number: 50880-1000

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
Twisting top for fit October 16, 2016
Reviewer: Pete Almgren from Mukilteo, WA  
As I was installing the unit in my 38' Bayliner, everything was going fine until I had to rotate the motor section on the pump section to mount the unit against a bulkhead in line with the hoses. The unit needed to be adjusted in situ as is so common with boats. I ended up with the clamp band separated from the unit during the rotation and getting it back on was an over an hourlong adventure. Partly because of access, after all it is a boat, mostly because of the amount of clamping force required to get the clamp bolts and nuts started. Once I had the clamp aligned with the sections and the bots and nuts started it went together quickly. If there had been a bit of material other than the tabs for the bolts for a pair of pliers, the job would have been very easy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Pretty nice pump July 31, 2013
Reviewer: Anonymous Person from Salem, Or  
I installed this pump to drain my two fish boxes that are plumbed into a tee. The ability to turn the pump head and adjust the angle of the input/output connects made the install pretty easy. So far, it has been working just fine and I'm pleased with the purchase.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
This is a really well built pump October 16, 2009
Reviewer: steve brown from aledo, TX United States  
This was exactly what I needed for my application - a deep bilge with small volume.  This empties the bilge quickly with no drainage back through the pump after the float switch cuts out.  I used a strainer to cut down on debris, but I think the design of this pump will allow a lot of little stuff to pass through without clogging.

Was this review helpful to you?


Browse for more products in the same category as this item:

Pumps/Plumbing - Pumps/Blowers/Toilets > Plumbing - Pumps, Toilets
Pumps/Plumbing - Pumps/Blowers/Toilets