Lumishore Smx150-Ccp Surface Mount Color-Change Light - Single
Lumishore Surface Mount 60 Watt Color Change Light
SMX150-CCP Surface Mount Color-Change Light - Single
Adding underwater lighting to your vessel has never been easier. One small cable hole and three mounting screws is all it takes, and thanks to an Active Thermal Rollback system, the Surface Mount e-lite can be used both above or below the waterline, at dock or underway. Compact and with a very slim profile, the Surface Mount e-lite is easily installed on any size vessel.
Lumishore's color-change system provides the customer with the ultimate choice of color to match water conditions, fishing patterns, or just set the right mood. Our proprietary HICOB technology optimizes the underwater viewing experience and gives the boat owner a choice of millions of controllable color options. The system comes with an attractive in-dash controller to select on of six preset colors (Blue, Cyan, White, Green, Magenta, and Red), color cycle, variable strobe, as well as owner-controlled color mix.
- Suitable for transom or hull-side mounting
- Recommended for boats up to 15m/40 feet
- 3 x 20-watt HICOB LED array
- Fixture Lumens 2,950 (White)
- Life expectancy: 50,000+ hours
- Profile: 16mm/0.7"; Diameter: 107mm/4.5"
- Surface mount, requires 9mm/0.4" cable entry hole
- Lens: Toughened BK7 Borosilicate, 90° beam angle
- Corrosion-proof advanced polymer body
- Input voltage: 9-31 Volts (max); 3.7 Amps @ 12V, 1.9 Amps @ 24V
- Over voltage/current, reverse polarity, and thermal rollback protection
- Can be used above or below the waterline
- Six preset colors, color cycle, variable strobe, owner-controlled color mix
- Single Surface Mount Color Change light for use as an addition to an existing set
- Up to eight lights per controller
Manufacturer Part Number: SMX150-CCP