Hodges Marine Electronics

S1G Corepack

• 12 Volt mini course computer designed for use with Type 1 Drives
  
• 6 Amp (15 Amp peak) motor drive output
  
• Recommended for mechanically steered vessels under 20,000 lbs (9000 Kg)
  
• Recommended for hydraulically steered vessels with cylinder ram sized 4.9in3 10.5in3(80cc 172cc)
  
• Available in easy-to- buy pre configured SmartPilot System Packs. All-in-one box autopilot solutions with corepack, control head and drive unit conveniently packaged together.
  
• Built in Rate Gyro
  
• Raymarine AST (Advanced Steering Technology) with AutoLearn
  
• Gyro Stablized heading output for MARPA and radar/chart overlay on Raymarine Radars

Behind the autopilot control head is the intelligence hub of the system, the Corepack. Consisting of an advanced course computer, fluxgate compass and rudder feedback, the Corepack is an integral part of the autopilot system.

Corepack components explained

Course Computer

The course computer is the intelligence behind your autopilot system. It includes a powerful microprocessor, programmed with all the steering know-how we've gained over many years and hundreds of thousands of boats. The course computer performs the main course keeping function and also houses the electronic control circuitry for the drive unit and power amplifier. NMEA inputs and outputs enable it to operate easily with equipment from other manufacturers. A SeaTalk interface provides connection to the control head and communication with other Raymarine devices.

Fluxgate Compass

The fluxgate compass module houses a state-of-the-art electronic compass mechanism, capable of tracking your boat's heading with incredible accuracy. The mechanism is gimballed, enabling it to handle pitch and roll movements up to +/-35o. The fluxgate compass connects directly to the course computer. It mounts on a bulkhead below decks on most boats; if yours is a steel-decked boat, the compass will be mounted above decks, out of the reach of magnetic interference.

Rudder Reference Transducer

This transducer performs a vital role too: it tells the course computer the precise position of your boat's rudder at all times. the rotary model is most commonly required; the linear model is used for hydraulic outboard steering systems. The rotary model is mounted adjacent to the rudder stock, while the optional linear model is mounted on the bullhorn ram of outboard engines.