Ram Mount No Drill Vehicle System 2012-2011 Ford 250, 350 +
Ram Mount No Drill Vehicle System 2011 Ford F250 F350 +Vehicle Base 2011 F-250, 350, 450, Etc.
Ford F-250 XL (2012)
Ford F-250 King Ranch (2012)
Ford F-250 Lariat (2012)
Ford F-250 XLT (2012)
Ford F-350 King Ranch (2012)
Ford F-350 Lariat (2012)
Ford F-350 XL (2012)
Ford F-350 XLT (2012)
Ford F-450 King Ranch (2012)
Ford F-450 Lariat (2012)
Ford F-450 XL (2012)
Ford F-450 XLT (2012)
Ford F-250 Crew Cab (2011)
Ford F-250 Super Cab (2011)
Ford F-350 Crew Cab (2011)
Ford F-350 Super Cab (2011)
Ford F-450 Crew Cab (2011)
Ford F-550 (2011)
Ford F-650 (2011)
Ford F-750 (2011)
Ford Excursion (2000-2005)
Ford Excursion Limited (2000-2005)Placement of Mount:
Passenger side floor board, in front of seat DRILLING REQUIREMENTS:
No - attaches to seat studs Seat Configuration:
Purchased Separately Material:
Powder Coated Steel The RAM Tough-Tray
is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics. Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max) Material:
High Strength Composite The RAM RAM-VP-SW1-89
, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.
The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". Material:
Powder Coated Marine Grade Aluminum Ball Size:
1.5" Rubber Ball "C" Size
Manufacturer Part Number: RAM-VB-185-SW1