Ram Mount Pod I Universal No-Drill Vehicle Mount W/Tab-Dock Apple Ipad Mini Holder
Ram Mount Apple Ipad Mini Sync Cradle No-Drill Vehicle Pod I

RAM Pod I Universal No-Drill Vehicle Mount with Tab-Dock iPad mini Holder

The Tab-Dock holder consists of a spring loaded back plate, custom support cups and Uni-Conn docking connector for the 4th generation iPad with factory lightning connector. The Uni-Conn docking connector enables the use of the factory iPad cables with docking connector for charging as well as other functions. Also works with most aftermarket cables and or modules with docking connectors. With the vast variety of available cable/docking connector accessories for the iPad you can quickly dock your iPad for charging, line out audio, external GPS antenna and much more. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your iPad can be used just as it was intended.

This Tab-Dock cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN, SLEEVE

The Tab-Dock cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:

Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.31"
Depth: 0.125" minimum to 0.56" maximum

Specifications:

Docking Cradle: Yes
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes

Cradle Features:

1. Support cups contain open slots to accommodate for tablets of various sizes
2. High strength materials maximize longevity of cradle
3. Unique design enables the use of the factory iPad charging cable and docking connector
4. Quickly dock and undock your iPad without requiring the insertion and removal of the charging cable
5. Back plate can support various size support cups
6. Spring loaded tension provides secure support for your tablet
7. Spring loaded cradle allows for quick release of your tablet
8. Full access to all ports
9. Lifetime warranty

Material:
High Strength Composite


No-Drill Mount Features:
The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The RAM POD I will hold everything you need safely and securely. The diamond adapter base consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

Note:
The "U" in the part number reflects product packaged in poly bag.

Manufacturer Part Number: RAM-B-316-1-238-TAB11U