Home > Hardware > Docking/Mooring/Cleats >

Taco Flex Vinyl Rub Rail Kit - Black W/Black Insert - 50' - 1-1/16"
TACO Flex Vinyl Rub Rail Kit - Black


 
Product Condition? Brand-New
Manufacturer's Warranty? Yes, Valid
Authorized Reseller? Yes
List Price: $240.75
Our Price: $146.62
You save $94.13!
Loc Bin: 114

Quantity in Stock
:14
Availability
: Usually Ships Same Day
Product Code: TAOV11-0809BBK50-2
Qty:

Description
 
Taco Flex Vinyl Rub Rail Kit - Black W/Black Insert - 50' - 1-1/16"
Taco Flex Vinyl Rub Rail Kit 1 1/16" Black W/Black Insert


Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-1/16"

Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.

Features:
  • 1-116"H x 1116"W x 50'L
  • Black with Black Insert


Manufacturer Part Number: V11-0809BBK50-2

Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Taco Flex Vinyl Rub Rail Kit July 24, 2017
Reviewer: Todd Parker from Monroe, WA United States  
Great price on a product that was a lot more $$$ on other sites. Quick shipping and excellent communication. Check them out for your marine needs. I know I will. A+++

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Just what I needed. March 16, 2017
Reviewer: Joe Moore from Zapata, TX United States  
My shipment arrived quickly, however, the box was damaged and had been taped back together.  All items were inside.  I decided to use the stainless screws and nuts I had removed from my old rub rail instead of the screws that came with the kit.  It took two people to install, one to stretch the rubber while the second drilled the rubber to match the old holes and install the  the rubber to the boat.  (I used a 1/4" extension to keep the rubber open while installing the screws to prevent damage.  I didn't want to drill new holes and use the screws for fear they would work loose and weaken the fiberglass.  The hardest part was installing the round rubber in the slot to cover the screws.  Both of my thumbs were really sore.  The install only took a couple of hours and looks great.  I would purchase again if I need to replace it in the future.  Great service from Hodges Marine and I recommend them.  Thanks,

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rub rail February 20, 2017
Reviewer: Anonymous Person  
Worked as expected and on time

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rub rail February 20, 2017
Reviewer: Anonymous Person  
Worked as expected and on time

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rub Rail Review and Free Advice April 17, 2016
Reviewer: Brad V from FL  
Installed beautifully and looks great! I've seen complaints about this product being too difficult to install because the heads of the screws are too large to pass through the gap in the rub rail without damaging it. I used a 1 inch long piece of standard 1/2" copper tubbing as a pre drilling and screw "conduit." It's thin enough to work into the gap of the rub rail and just wide enough to let the head of the screw pass through it. After the screw bottoms out (don't over tighten) just slide the copper tube down the line a few inches without removing it from the gap and pre drill and set the next screw. Works like a charm!

Was this review helpful to you?


Browse for more products in the same category as this item:

Hardware > Docking/Mooring/Cleats
Hardware