Facebook


Quick Links


  Home > Hardware > Boat Propellers >

  Turning Point Hustler Aluminum Right-Hand Propeller 13 X 19 4-Blade
Turning Point Hustler Aluminum Right-Hand Propeller 13 X 19 4-Blade


 
Condition? New Retail Box
List Price: $130.00
MAP Price: $104.00

Stock Status: In Stock
Availability: Usually Ships Same Day
Product Code: TUR21431930
Qty:

Description Quick Specs
 
Turning Point Hustler&Reg; Aluminum Right-Hand Propeller 13 X 19 4-Blade
Turning Point Hustler Al Rh Propeller 13 X 19 4-Blade


Hustler® Aluminum Right-Hand Propeller

Size: 13 x 19, 4-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:
  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish
  • Uniquely engineered with two different blade geometries
  • First two blades increase hole shot and cornering
  • Second two blades increase high speed and maximum stern lift
  • Unmatched in cornering, acceleration, boat handling, and top speed
  • Best water sports and performance propeller in the market


Manufacturer Part Number: 21431930

Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.


  0 of 0 people found the following review helpful:
 
Correction to review. July 6, 2014
Reviewer: Dave from B.C. Canada  
I got confused with my conversion kph to mph.
Prop gave 74 kph which is 46 mph. 7% slip.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works well. July 6, 2014
Reviewer: Dave from B.C. Canada  
Didn't realize I would have to modify the anode tab to accommodate the extreme rake of this prop, but it wasn't a big deal. Trimmed it to get approx 1/4 clearance.
Installed the prop on a 1987 merc 115hp inline six (2:1 gear ratio), 17 ft fiberglass boat (Glastron V-173). With me, dog and 200 lbs of gas, tools and kicker, this prop allowed the motor spin 5500 rpm at 44mph gps at 2500 ft. Acceleration was good and no problems with blowout or ventilation. It likes to be trimmed higher than the merc prop. I would recommend it.

Was this review helpful to you?


Browse for more products in the same category as this item:

Hardware > Boat Propellers
Hardware