Maretron Pressure Transducer - 0 To 5000 Psi

Condition: New

$207.74
Quantity in Stock: 0
SKU
MARPT-0-5000PSI-01

Free Ground Shipping*

Out of Stock - Expected Ship date: Fri May 03, 2024 to Thu May 23, 2024
 

Maretron Pressure Transducer - 0 To 5000 Psi

Pressure Transducer - 0 to 5000 PSI

This pressure transducer is designed to connect to the NMEA 2000® network via a Maretron FPM100 Fluid Pressure Module.

Specifications:

  • Range: 0 to 5000 PSI (344.74 bar)
  • Accuracy: +/- 0.5% Full Scale
  • Type: Absolute (no vent tube)

Installation:

All Maretron pressure transducer assemblies are equipped with a 1/4 in. NPT male threaded fitting. Install the pressure transducer to a 1/4 in. NPT female fitting on the system or tank is to be monitored with a maximum torque of 150 in-lbs (16.95 Nm).

If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.



Manufacturer Part Number: PT-0-5000PSI-01
More Information
Special Shipping Message Free Ground Shipping*
Manufacturer Part Number: PT-0-5000PSI-01
Write Your Own Review
You're reviewing:Maretron Pressure Transducer - 0 To 5000 Psi
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?

Return Policy

Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).

Contact Us