Ram Mount Flat Surface Horizontal Single Swing Arm Mount

Rating:
97% of 100

Condition: New

$74.49
Quantity in Stock: 1
SKU
RAMRAM-109HU

Free Ground Shipping*

To Ship Out Today, Order This Item in the Next
 

Ram Mount Flat Surface Horizontal Single Swing Arm Mount

RAM Flat Surface Horizontal Single Swing Arm Mount

The RAM single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

Dimensions:
  • Center of knob to center of ball socket: 6"
  • Overall length of swing arm assembly: 10.75"
  • Overall height: 5.6"
  • Height from base to top of knob: 4.91"

Material:
Powder Coated Marine Grade Aluminum

Note:The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

Manufacturer Part Number: RAM-109HU
More Information
Special Shipping Message Free Ground Shipping*
Manufacturer Part Number: RAM-109HU
Write Your Own Review
You're reviewing:Ram Mount Flat Surface Horizontal Single Swing Arm Mount
Your Rating
Customer Questions
What is the distance center to center on the base plate mounting holes.
The hole pattern for Bottom Plate: 2.5" x 2.5".
What are the dimensions of the mounting base?
Top Plate: 6.25" x 2" // Bottom Plate: 3.47" x 3.47"
Can you please tell me the mounting base dimensions and the hole spacing for the 4 holes? Click READ MORE to see a photo
Plate dimensions: Top Plate: 6.25" x 2" Bottom Plate: 3.47" x 3.47"   Hole Spacing: Top Plate: See Drawing Bottom Plate: 2.5" x 2.5"  
Is any of the installation hardware included?
The mounting hardware is not included with this item.
Did you find what you were looking for?

Return Policy

Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).

Who Bought This Also Bought
Contact Us