Jabsco Sliding Vane Self-Priming Diesel Transfer Pump - 9 Gpm & 12v
Condition: New
Free Ground Shipping*
Jabsco Sliding Vane Self-Priming Diesel Transfer Pump - 9 Gpm & 12v
Sliding Vane Self-Priming Diesel Transfer Pump - 9 GPM & 12V
Designed for refuelling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.
Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.
Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .
Features:
- Faster refuelling - 35 litres/minute (9.5 U.S.GPM).
- High head capability - 6 metres (19 feet).
- Self priming up to 2.8 metres (9 feet).
- Vibration tested. • IP55 protected motor
Specifications:
- Temperature Range : -30°C to +40°C (-22°F to +104°F)
- Pump Body : Aluminium
- Rotor : Vectra
- Vanes : PTFE Filled Ryton
- Shaft : Steel
- Seal : Nitrile
- Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨)
- Motor : 12V permanent magnet, corrosion resistant IP55 protected
- Duty : 25 mins @ +40°C (104°F)
- Current Draw: 15 Amps @ 3m head
- Maximum Current: 20 Amps
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Manufacturer Part Number: 23870-1200
Special Shipping Message | Free Ground Shipping* |
---|---|
Manufacturer Part Number: | 23870-1200 |
Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Login and Registration Form