Rule 3" In-Line Blower
Condition: New
Free Ground Shipping*
Rule 3" In-Line Blower
Rule In-Line Blower - 3" DuctingPart Number: 140
Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.
Features
- Efficient high-volume air flow
- Quiet operation
- Low amp draw
- Slip-on inlet and outlet ducting connections
- Sealed motor shaft for moisture protection
- Corrosion resistant nickel-plated motor housing
- IMCI (CE)
- USCG 183.410 Compliant: Ignition protected
Applications:
Race cars and helmet ventilation
Bus ventilation (engine and bathroom fumes)
Prison van ventilation (cooling, air-freshening)
Blow-up signs and mascots
Tanning booths
Building ventilation
Specifications
- Approvals: CE
- Dimensions (H x W x D): 76 x 127 x 81 (mm)
- ElectricalCharacteristics: 2.9 Amp
- Flow Rate (US gallons & litres): 135 CFM @ Open Flow
- Fuse Size: 4 (amp)
- Product Inlet Fitting: 3" (76 mm) Ducting
- Product Outlet Fitting: 3" (76 mm) Ducting
- Voltage: 13.6 (Vdc)
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Manufacturer Part Number: 140
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | 140 |
| Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Login and Registration Form