Newmar Wp-35 12v Charger 1 Bank 35 Amp Waterproof
Condition: New
Free Ground Shipping*
This waterproof charger is specifically designed for installation in exposed locations aboard marine vessels. Its 100% sealed case offers installation locations not available to traditional on-board chargers, thus freeing compartment space where non - weatherproof chargers must be mounted. A remote battery meter displays the charge level via color coded bar graph, allowing quick check of battery bank condition from a distance.
Features:
- Anodized aluminum heat sink case with water intrusion protection on all seams and joints. IP-65 rated vent allows unit to "breathe" and prevents internal condensation while still maintaining waterproof integrity
- Includes EVM-12 Multi-colored Remote Battery Status Meter
- Two step charging safely restores Flooded Lead Acid, AGM or gel type batteries
- Designed for one battery bank operation. Second battery bank easily tied in via optional battery integrator, model BI-100
Specifications:
Temperature Rating:
- 0-50° C; Derate linearly from 100% @ 40° C to 50% output at 50° C.
- Thermal shutdown @ 70° C case temperature
Wiring:
- No exposed terminal blocks, wiring leads routed through case via liquid tight fittings
Mechanical:
- Anodized aluminum heat sink case with water intrusion protection on all seams and case penetration points, all stainless steel hardware
- Mounting via re-enforced 3/8" flanges with 1/4" mounting holes.
Input:
- 115 VAC, 60 Hz, 5 Amps
Output:
- 12 VDC nominal, two stage, float voltage 13.4
- 35 amps for one hour from cold start (25° C), 17 amps
Continuous duty
- Single bank with optional second bank tie in via Battery Integrator, model BI-100
Battery Compatibility
- Flooded Lead-Acid, AGM, and Gel-Cell
Protection:
- Output: Current limiting and reverse polarity fused (internal)
- Input: AC Fuse (internal)
- Over temperature shut down with auto reset
- Current limiting prevents overload when charging dead batteries.
- Water resistant for applications exposed location, IP-65 vent prevents internal condensation
Option:
- Multiple battery bank charging, model BI-100 Battery Integrator
Size/Weight:
- 14" (H) x 5-3/4" (D) x 6-7/8" (W); 30 lbs.
Manufacturer Part Number: WP-35
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | WP-35 |
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).