Newmar Px-3 Junction Box

Condition: New

$57.62
Quantity in Stock: 8
SKU
NEWPX-3

Free Ground Shipping*

To Ship Out Today, Order This Item in the Next
 

Newmar Px-3 Junction Box

PX-3 Junction Box

This waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spray.

Connector Strips Installed in Boxes

Molded nylon encases pairs of connectors that use screw compression to secure wires without the use of lugs. Ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel “finger” compressed by a screw. The screw does not make contact with the wires, protecting the copper strands from cuts and breakage and meeting ABYC standards.

Features:

  • Similar to BX Series junction boxes but made from rugged, non-corrosive, high-impact polypropylene
  • The snap-on cover provides a watertight seal
  • “Universal” cut-to-fit graduated diameter cable entries accommodate a wide cable range
  • Multiple position connector strips with “captive” screw compression wire terminals installed, see matrix below for connector strip specifications per box
  • Multiple knockouts are provided for conduit access (in addition to cable entries)
  • IEC Waterproof Rating: IP55 – “Water projected in jets against the enclosure from any direction shall have no harmful effects.”

Specifications:

  • Number of Connector Strips: 2
  • Positions per Strip: 9
  • Max Wire Gauge: 16
  • Number of Cable Entry Ports: 7
  • Number of Cable Entries Installed: 7
  • Spare Cable Entries Provided: 0
  • Cable Diameter Range (inches): .14 – .99
  • Cable Diameter Range (mm): 3.5 – 25.5
  • Box Size (inches): 4.45 x 4.45 x 2.29    
  • Box Size (cm): 11.3 x 11.3 x 5.8


Manufacturer Part Number: PX-3
More Information
Special Shipping Message Free Ground Shipping*
Manufacturer Part Number: PX-3
Write Your Own Review
You're reviewing:Newmar Px-3 Junction Box
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?

Return Policy

Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).

Contact Us