Raymarine T70133 Retro Pack Rs130 And St1-Stng Converter
The Raystar 130 GPS sensor brings a whole new level of precision to your Raymarine navigation network. Equipped with an ultra-precise 48-channel GPS receiver with WAAS, EGNOS and MSAS Satellite Differential decoding, the Raystar 130 GPS provides consistent accuracy of better than 3 meters. Raystar 130 is also highly resistant to intentional and unintentional GPS jamming and signal interference.
The Raystar 130 supports the latest SeaTalkng and NMEA2000 data networking protocols making it the perfect primary or backup GPS receiver for your multifunction display system, instrument system or chartplotter. Raystar 130 offers flexible installation and can be low-profile mounted on any horizontal surface. It also includes a 1 x 14 TPI pole mounting adapter that can be used to attach the Raystar 130 to any standard antenna extension pole or rail mount.
- Ultra compact all-in-one GPS receiver with Satellite Differential
- Flexible surface mount and pole mounting options
- Ultra-low power consumption (50 mW or less)
- New ultra-precise 48-channel GPS receiver
- SeaTalkng and NMEA2000 network compatible.
- WAAS, EGNOS, GAGAN and MSAS compatible.
- Low profile flush mount and threaded pole mount (1" x 14 TPI) kits included.
- Removeable interconnect cable facilitates easy installation.
- Built-in LED diagnostic indicator.
Raystar 130 GPS Sensor Specifications | Power | | | Nominal voltage (volts DC) | 12V, 24V systems | | | | Power consumption (typical) watts | 50mW max. | | | Physical | | | Overall dimensions (DxH) mm | diameter 95x30 | | | | Product weight kg (lbs) | 0.13 (0.29) | | | | Mounting methods | flush/pole/rail Pole mount thread: 1" x 14 TPI. This is the standard thread found on VHF radio antenna mounts and extension poles. | | | | Cable length | 6 meters | | | Data Interfacing | | | Protocols supported | SeaTalkng ? NMEA 2000 (certified) (via DeviceNet adaptor) | | | | LEN | 1 Refer to SeaTalk NG Reference Manual for more information. | | | Approvals | | | EMC Approved | Europe: 2004/108/EC ? Australia and New Zealand: C-Tick, Compliance Level 2 | | | | CE Marked | Yes | | | Environmental | | | Operating temperature range | -25 °C to +55 °C (-13 °F to 131 °F) | | | | Non-operating temperature range | -25 °C to +70 °C (-13 °F to 158 °F) | | | | Humidity | max 93% | | | | Waterproofing standard | Waterproof to IPX6 | | | GPS Features | | | Type | Active antenna | | | | Signal acquisition | Multiple parallel channel receiver (C/A code) | | | | Satellite differential type | WAAS/EGNOS/MSAS/GAGAN | | | | Differential acquisition | automatic (satellite) | | | | Position accuracy (RMS) | <15m | | | | Position accuracy with SDGPS (RMS) | <5m | | | | Speed accuracy (RMS) | <0.3kts | | | | Time to fi rst fi x from cold start (typical) | < 2 minutes (< 45 seconds typical) | | | | Geodetic datum | WGS84 | | | | Sensitivity | High sensitivity ? acquisition down to -147 dBm | |
The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network.
The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including:
- SeaTalk 1 to SeaTalkng converter
- SeaTalkng Terminators (x2)
- SeaTalkng Blanking Plugs (x2)
- 400mm (15-inch) SeaTalk 1 to SeaTalkng converter cable
- SeaTalkng power cable
- 1m (3.3-foot) SeaTalkng spur cable
Manufacturer Part Number: T70133
