Actisense A2k-Tdc-0m5 Nmea2000 Micro Cable Assembly - 0.5m
Condition: New
Free Ground Shipping*
Actisense A2k-Tdc-0m5 Nmea2000 Micro Cable Assembly - 0.5m
A2K-TDC-0M5 NMEA2000 Micro Cable Assembly - 0.5M
Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.
Actisense Lite cable assemblies allow quick installation and come with quality reassurance as only the Actisense UL-certified cable is used.
NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires, and a drain wire. The drain wire connects to the cable shield, which protects the signal, power, and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.
NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with an NMEA 2000 mini cable to keep the outer Lite sections to the 100-meter maximum.
The maximum length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required, as the total of all drop lengths must not exceed 72 meters.
The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.
Technical Specifications:
- Rated Current - 3A
- Rated Voltage - 60VDC
- Male Contact - Brass, gold-plated
- Female Contact - Phosphor bronze, gold plated
- Contact Carrier - PBT, black
- Contact Polarization - Standard M12 -“A”- polarization
- Mating Thread - M12
- Screw Cap - Brass, nickel plated
- O-Ring Seal - Rubber, black
- Housing - PVC, black
- Power Pair - 22 AWG (19-strand tinned copper)
- Data Pair - 24 AWG (19-strand tinned copper)
- Drain - 22 AWG (19-strand tinned copper)
- Braid - 37 AWG (tinned copper)
- Jacket Material - 0.8mm Nom. PVC, black
- Jacket Outer Diameter - 6.85mm ±0.254mm
- Weight - 67g
- Protection - IP67 (when mated)
- Operating Temperature - -20°C to +70°C
- Storage Temperature - -40°C to +85°C
Manufacturer Part Number: A2K-TDC-0M5
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | A2K-TDC-0M5 |
| Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, programmed AIS units, opened/registered KVH Starlink products, trolling motors, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Defective Products:
A prepaid return shipping label will be provided for defective items if deemed necessary by the manufacturer. The customer must first contact the manufacturer for technical support to confirm product is defective and that product replacement is deemed necessary. Please provide the name of the technician, serial number, and details about the defect. Return instructions and a label will be provided.
Non-Defective Returns:
Eligible non-defective products may be returned for a full refund minus shipping paid (if any). To be eligible for a non-defective return, your merchandise must be unused/unopened and must be in the original packaging. Non-defective returns that show signs of installation/use, missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records will not be accepted. Customer is responsible for return shipping costs of non-defective returns. You should consider using a trackable shipping service or purchasing shipping insurance for items of value. Hodges Marine is not liable for lost or damaged return packages.
General - Cancellations, Shipping Damage, Missing Packages, Shipment Refusals:
Orders that you submit online are processed immediately and may not be cancelled, and you may need to wait until you receive the merchandise in order to return it. Claims of shipment damage, incorrect/missing items, or non-receipt of goods must be made within seven (7) days. Customer is responsible for all costs associated with refused shipments or return to sender (RTS) shipments including carrier fees, freight to the customer, and return freight. We reserve the right to refuse returns that are sent COD, without a return authorization, show signs of undisclosed installation/use, has missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records. If you do not comply with any of the above conditions, We reserve the right to refuse the return/exchange, or to impose different or additional conditions. Please see our TERMS AND CONDITIONS for additional applicable information.
Last Updated: JUNE 09 2026
Please email us at [email protected] or use the product returns link.
