Bep Contour Matrix Gas Detector W/Control
Condition: New
Free Ground Shipping*
Bep Contour Matrix Gas Detector W/Control
Contour Matrix Gas Detector with Control
The Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors that detect both LPG and Petrol, with visual and audible alarms. There is a test switch to check the operation of sensors with indicators for fault detection. 600-GDL Gas Detector has the same features as the 600-GD, with the additional ability to switch a valve on and off. The 600-GDL has a "pulse and hold" feature which allows the solenoid valve to be opened, using full power, and then reducing power to hold the valve in the open position. This reduces power consumption and heat generated whilst the valve is in the on position.
Features:
- Operating Voltage 10 to 32 Volts DC
- Self-testing capability
- Microprocessor control
- Provision for external alarm
- Automatic shut-off solenoid control with pulse and hold circuit for low power draw (600-GDL only)
- Provision for bilge blower
- Dual sensor capability
- For remote alarm operation use part no. 54-27C4
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Manufacturer Part Number: 600-GDL
Special Shipping Message | Free Ground Shipping* |
---|---|
Manufacturer Part Number: | 600-GDL |
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Login and Registration Form