Bep Pro Installer 400a Ez-Mount Dual Bank Control Battery Switch - Mc10
Condition: New
Free Ground Shipping*
Bep Pro Installer 400a Ez-Mount Dual Bank Control Battery Switch - Mc10
Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads (for lighting, stereo, fridge etc). For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches. As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.
- Tested to UL1107 ignition protection, CE
- Tinned copper 10mm (3/8 inch) studs
- Stainless steel washers and nuts
- Fiber reinforced plastics
- 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce the Amp rating)
- Waterproof to IP67
- Same interconnection height as Pro Installer
- Removable knob allows isolation during servicing
- 3 removable side plates for protection
- Industry standard 3.85 x 3.85 inch footprint
- For surface mounting only
- Each Pro Installer battery switch is fully tested for pressure sealing, rotation force and electrically load tested
Specifications
Mounting: Surface Only
Voltage: 48v DC (for 12-48v systems, both banks must be same voltage)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1, 1/2, Parallel, Off
Stud: 4x 10 mm (3.8")
Manufacturer Part Number: 772-DBC-EZ
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | 772-DBC-EZ |
| Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, programmed AIS units, opened/registered KVH Starlink products, trolling motors, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Defective Products:
A prepaid return shipping label will be provided for defective items if deemed necessary by the manufacturer. The customer must first contact the manufacturer for technical support to confirm product is defective and that product replacement is deemed necessary. Please provide the name of the technician, serial number, and details about the defect. Return instructions and a label will be provided.
Non-Defective Returns:
Eligible non-defective products may be returned for a full refund minus shipping paid (if any). To be eligible for a non-defective return, your merchandise must be unused/unopened and must be in the original packaging. Non-defective returns that show signs of installation/use, missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records will not be accepted. Customer is responsible for return shipping costs of non-defective returns. You should consider using a trackable shipping service or purchasing shipping insurance for items of value. Hodges Marine is not liable for lost or damaged return packages.
General - Cancellations, Shipping Damage, Missing Packages, Shipment Refusals:
Orders that you submit online are processed immediately and may not be cancelled, and you may need to wait until you receive the merchandise in order to return it. Claims of shipment damage, incorrect/missing items, or non-receipt of goods must be made within seven (7) days. Customer is responsible for all costs associated with refused shipments or return to sender (RTS) shipments including carrier fees, freight to the customer, and return freight. We reserve the right to refuse returns that are sent COD, without a return authorization, show signs of undisclosed installation/use, has missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records. If you do not comply with any of the above conditions, We reserve the right to refuse the return/exchange, or to impose different or additional conditions. Please see our TERMS AND CONDITIONS for additional applicable information.
Last Updated: JUNE 09 2026
Please email us at [email protected] or use the product returns link.
