Digital Yacht Engine Link Nmea 2000 Engine Monitor
Condition: New
Free Ground Shipping*
Digital Yacht Engine Link Nmea 2000 Engine Monitor
Engine Link NMEA 2000 Engine Monitor
ENGINELink interface is an NMEA 2000 wireless device that allows mobile phones, iPads, and tablets to display engine data as well as provide a link to boat AIS, depth, and GPS information for popular apps such as Navionics, NavLink, iNavX, SavyNavy, AquaMaps and 100's more. Now boaters can have boat engine data plus their favorite charting app displayed on their mobiles and tablets in real-time.
Engine information such as RPM, temperature, pressure, and battery voltage is displayed as an attractive dashboard display through the web browser so there’s no need for a custom app. Setup and installation are easy. Just “T” into the boat's NMEA 2000 backbone and ENGINELink is self-powered from the network. It creates a secure, password-protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP-IP protocols are supported for compatibility with 3rd party apps.
Either single or dual-engine installations are supported. If the vessel is fitted with NMEA 2000 compatible trim tabs or jack plates, then the status of these performance-critical systems is also displayed on the dashboard.
You can configure ENGINELink through its own simple web interface - just open your web browser, enter its IP address and you'll access the attractive dash to display and configure your gauges. No complicated programming software or app is required. iOS and Android devices can display a navigation app and a web browser side by side - so you can have your favorite charting app open alongside engine instrument displays.
You can change the network name & password and even merge the wifi to an existing wifi network on board. NMEA 2000 data can be viewed and logged in the web browser allowing for easy fault finding of issues. If the engine generates diagnostic alerts then these can be displayed and interrogated too.
Features:
- Connect to any NMEA 2000-ready engine or network
- Built-in web gauge display – no app needed
- Display single or dual-engine gauges
- Configurable gauges – choose the parameters you want to monitor
- Set alarm/alert thresholds and view diagnostics
- TCP/UDP streaming of navigation data (GPS/AIS/Depth) for popular navigation apps
- Tank levels, fuel flow, and trip computer-type displays
- Tilt, trim tabs, and jack plate support
- Manufacturer-specific engine modes
Specifications:
- Powered from NMEA 2000 Network – fits in seconds
- Password-protected wireless interface 802.11b/g/n
- AP or STA mode (can join another boat wifi network)
- TCP/UDP streaming of navigation data (AIS, GPS, and depth) to popular apps like Navionics, TZ, AquaMaps, iNavX etc
- Supported PGNs (1st Release) 127488, 127489, 127493, 130312, 130316, 127505, 130576, 128780
- Preset gauge displays for leading manufacturers or customize your display
- Flexible, upgradeable interface
Target Markets & Applications:
- Brings boat engine data to mobile devices
- Primarily aimed at the US center console and sports fishing market where outboard-powered craft have NMEA 2000 networks with engine data available but will work with any NMEA 2000 ready engine installation – inboard or outboard
- Provides additional data displays and extra functionality than MFDs
- Low-cost dashboard repeater accessible anywhere onboard
- Ideal test tool for service technicians
- Will be at the leading edge of electric propulsion PGN implementation
- Logging and replay of data for onshore analysis
- Support for the latest jack plate and trim tab PGNs, for optimizing boat performance
- Connects to Navionics app (and 100s more) for AIS, GPS, and depth data
Manufacturer Part Number: ZDIGELINK
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | ZDIGELINK |
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, programmed AIS units, opened/registered KVH Starlink products, trolling motors, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Defective Products:
A prepaid return shipping label will be provided for defective items if deemed necessary by the manufacturer. The customer must first contact the manufacturer for technical support to confirm product is defective and that product replacement is deemed necessary. Please provide the name of the technician, serial number, and details about the defect. Return instructions and a label will be provided.
Non-Defective Returns:
Eligible non-defective products may be returned for a full refund minus shipping paid (if any). To be eligible for a non-defective return, your merchandise must be unused/unopened and must be in the original packaging. Non-defective returns that show signs of installation/use, missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records will not be accepted. Customer is responsible for return shipping costs of non-defective returns. You should consider using a trackable shipping service or purchasing shipping insurance for items of value. Hodges Marine is not liable for lost or damaged return packages.
General - Cancellations, Shipping Damage, Missing Packages, Shipment Refusals:
Orders that you submit online are processed immediately and may not be cancelled, and you may need to wait until you receive the merchandise in order to return it. Claims of shipment damage, incorrect/missing items, or non-receipt of goods must be made within seven (7) days. Customer is responsible for all costs associated with refused shipments or return to sender (RTS) shipments including carrier fees, freight to the customer, and return freight. We reserve the right to refuse returns that are sent COD, without a return authorization, show signs of undisclosed installation/use, has missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records. If you do not comply with any of the above conditions, We reserve the right to refuse the return/exchange, or to impose different or additional conditions. Please see our TERMS AND CONDITIONS for additional applicable information.
Last Updated: JUNE 09 2026
Please email us at [email protected] or use the product returns link.
