Maretron Mpower 16-Channel Dc Load Controller Module W/Nmea 2k W/O Connectors
Condition: New
Free Ground Shipping*
Maretron Mpower 16-Channel Dc Load Controller Module W/Nmea 2k W/O Connectors
MPower® 16-Channel DC Load Controller Module with NMEA 2K without Connectors
For larger breakers and more circuits, the MPower® CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps, and twelve breakers handle a maximum of 12 amps, with a total current capacity of 125 Amps. Additionally, circuits can be paralleled.
The CLMD16 also supports two H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc. There are 3 inputs capable of monitoring tank levels.
The CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.
Features:
- NMEA 2000® Interface
- IP67 Rated
- Ignition Protected
- Opto-isolated from NMEA 2000®, eliminating potential ground loops
- Sixteen (16) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network
- 4 breakers capable of carrying up to 25 Amps
- 12 breakers capable of carrying up to 12 Amps
- Individual breaker electrical current monitoring
- Breakers can have Power-Up states defined (ON, OFF, or previous states)
- Breakers can be locked against inadvertent actuation.
- Capacitive touch switches for local control of all loads
- All inputs and outputs are protected against short to Power and short to Ground
- Automatic ECB overcurrent shutdown
- Automatic ECB thermal shutdown (Overtemperature Protection)
- Eight (8) discrete digital input channels capable of sensing +ve or ground signals
- Two (2) resistive analog input channels
- One (1) 4-20mA current loop input channel
Applications:
- Remote control of navigation lights
- Remote control of boarding lights
- Burnt-out bulb alerts
- Control of area lights with dimming
Manufacturer Part Number: CLMD16
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | CLMD16 |
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, programmed AIS units, opened/registered KVH Starlink products, trolling motors, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Defective Products:
A prepaid return shipping label will be provided for defective items if deemed necessary by the manufacturer. The customer must first contact the manufacturer for technical support to confirm product is defective and that product replacement is deemed necessary. Please provide the name of the technician, serial number, and details about the defect. Return instructions and a label will be provided.
Non-Defective Returns:
Eligible non-defective products may be returned for a full refund minus shipping paid (if any). To be eligible for a non-defective return, your merchandise must be unused/unopened and must be in the original packaging. Non-defective returns that show signs of installation/use, missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records will not be accepted. Customer is responsible for return shipping costs of non-defective returns. You should consider using a trackable shipping service or purchasing shipping insurance for items of value. Hodges Marine is not liable for lost or damaged return packages.
General - Cancellations, Shipping Damage, Missing Packages, Shipment Refusals:
Orders that you submit online are processed immediately and may not be cancelled, and you may need to wait until you receive the merchandise in order to return it. Claims of shipment damage, incorrect/missing items, or non-receipt of goods must be made within seven (7) days. Customer is responsible for all costs associated with refused shipments or return to sender (RTS) shipments including carrier fees, freight to the customer, and return freight. We reserve the right to refuse returns that are sent COD, without a return authorization, show signs of undisclosed installation/use, has missing parts/packaging, missing proof of purchase/UPC code, or have serial numbers that do not match our records. If you do not comply with any of the above conditions, We reserve the right to refuse the return/exchange, or to impose different or additional conditions. Please see our TERMS AND CONDITIONS for additional applicable information.
Last Updated: JUNE 09 2026
Please email us at [email protected] or use the product returns link.