Navisafe Portable Navilight 360 Degree 2nm - White W/Bendable Suction Cup Mount
Condition: New
Free Ground Shipping*
Navisafe Portable Navilight 360 Degree 2nm - White W/Bendable Suction Cup Mount
Portable Navilight 360° 2NM - White w/Bendable Suction Cup Mount
The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of Usage:
*Based on the Convention of the International Regulations for Preventing Collisions at Sea
On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:
- Sternlight
- All-round white light
On a power-driven vessel underway of less than 12 meters in length:
- Masthead light
- Sternlight
- All-round white light
On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:
- All-round white light
Rowing/Paddle Vessels
- All-round white light
Anchored vessels and vessels aground
- Anchor lights must always be shown from sunset to sunrise
- All-round white light
Specifications:
- USCG Approval, 2 Nautical Miles
- 5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
- Floatable, waterproof (20 m) and air-tight
- Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
- Powered by three AAA batteries (not included)
- Size: H = 35 mm, Diameter = 68 mm
- Weight (net): 113 g
Modes / approximate burn time:
- 16 white LED, 360° All-round light, Anchoring light / 15hrs
- 16 white LED, 360° Flashing light / 85hrs
- 10 white LED, 225° Masthead light / 24hrs
- 6 white LED, 135° Sternlight / 32hrs
- 4 white LED, 360° Cabin light / 72hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
- The outboard engine
- The steering console, the windshield or any place on the hull where the lights are seen best
- On canoes and kayaks with a smooth and flat surface
Specifications:
- Secure suction cup base
- Quick release suction cap
- Bendable shaft moves through 180°
- Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
- Size: L = 68mm, H = 157mm
- Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Manufacturer Part Number: 001KIT2
Special Shipping Message | Free Ground Shipping* |
---|---|
Manufacturer Part Number: | 001KIT2 |
Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Login and Registration Form