Seaview 30" Tapered Closed Dome Aft Leaning Radar Mount W/Removable Spreader & 10" X 10" Base Plate
Condition: New
Free Two Day Shipping*
Seaview 30" Tapered Closed Dome Aft Leaning Radar Mount W/Removable Spreader & 10" X 10" Base Plate
30" Tapered Closed Dome AFT Leaning Radar Mount with Removable Spreader & 10" x 10" Base Plate
The Seaview Tapered Masts are for most 18" to 24" closed dome radars or open array radars up to 4.5'.
Durability
Unlike any other mount available, Seaview takes the finish to another level. We take these Tapered Masts in their raw aluminum form through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3 part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Easy Installation
The lower mounting plate will accept most standard 18" and 24" radar domes or open array radars up to 4.5' in length. No need to drill holes to mount your radar allowing for a quick and easy setup.
Spreaders
Spreaders are fitted with standard 1-14 threaded fittings made out of nylon to eliminate corrosion. (Note: do not exceed 4' antennas on spreaders). The spreaders are also removable to keep shipping costs down.
Top Mounting Plate
Feel free to mount a light to the top mounting plate!
Cable Management
Oval hollow mast section allows for easy cable management.
Manufacturer Part Number: PMA100S
Special Shipping Message | Free Two Day Shipping* |
---|---|
Manufacturer Part Number: | PMA100S |
Specifications: |
|
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
Login and Registration Form