Sem 2k Urethane Chip Guard Kit
Condition: New
Free Ground Shipping*
Sem 2k Urethane Chip Guard Kit
2K Urethane Chip Guard Kit
2K Urethane Chip Guard is a job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. Two-component system helps eliminate common problems seen with one-component products, such as long flash times, pinholes, solvent trap, delamination, and solubility.
Features:
- OEM recommended
- 2K durability with 1K convenience
- Reproduces fine to coarse and light to heavy OE textures
- Builds heavy textures without trapping solvent
- No flash time required between coats
- 50 state compliant
- Pinhole free
- Easy-to-use shake-and-shoot system
- R.O. billable unit
- 16 defined textures with detailed instructions
- Non-yellowing and non-staining
- Tintable, paintable, or can be used as a textured top coat
- Impact and chemical resistant
- Excellent for sound dampening
Applications:
- Steel
- Aluminum
- Galvanized steel
- Existing OEM paint
- Polyester fillers
- E-coat
- Fiberglass
- SMC and FRP
- Epoxy primer
- 2K urethane primer and sealer
Properties:
- Opaque gray
- 12 oz. (mixed) kit
- Produces a variety of textures
- Pot Life @ 70°F and 50% R.H.: 20 minutes
- Flash Time: 0 – 20 minutes
- Paint Time: 20 minutes – 4 hours
Manufacturer Part Number: 52000
| Special Shipping Message | Free Ground Shipping* |
|---|---|
| Manufacturer Part Number: | 52000 |
Return Policy
Hodges Marine accepts returns for up to thirty (30) days after shipment. Our return policy does not apply to the following goods: Open software, mapping/chart data cards, international orders, freight truck only items, and special order items. These items are not eligible for return, refund or exchange. Shipping charges (if any) are non-refundable. If your return is accepted by Us, We will provide one of the following within a reasonable time: an exchange of merchandise for the item returned, a non-transferable merchandise credit, a credit to the payment card or original method of payment used to pay for the item, a check, or another remedy that we determine in good faith is appropriate in the circumstances. Customer must request a return merchandise authorization (RMA) through the product returns link on our website or by emailing us at [email protected]. A RMA number will be issued with instructions for returning the package within a reasonable time (normally 1-3 business days).
